H. MAINTENANCE AND CARE
Note:
Never attach labels, adhesive tape or stickers to the face shield or sun
visor.
Tip:
Stubborn dirt on the outer surface of the face shield (e.g. dried-on
insect remains) can be easily removed by covering the closed visor
with a moist or wet cloth and allowing the dirt to soften for around 30
minutes to 1 hour.
Note:
Always avoid temperatures above 40 °C and high humidity when
choosing a place to store the face shield, as these conditions can cause
damage to the face shield.
4. INNER LINING
The inner lining of the E1 can be removed completely. The head and cheek
pads can be washed by hand using a mild soap solution (e.g. with highly
diluted standard mild detergent) at a maximum temperature of 30 °C. Allow
the lining to dry at room temperature and with good ventilation.
Tip:
If required (e.g. during a break in a journey), the headband can be hung
out to dry over the mirror.
5. VENTILATION
VENTILATION COWL
When necessary, the head ventilation system's air inlet cowl can be removed
to clean the ventilation mechanism.
52