SCHUBERTH E1 Manual Del Usuario página 22

D. THE HELMET
12. FACE SHIELD WITH INTEGRATED ANTI-FOG LENS
The face shield is a fog-free double-lens visor. By fixing the inner anti-fog
lens using eccentric pins, the two visor panes are pre-tensioned together and
are thereby sealed. An insulating air cushion is thus formed between the
visor's main plate – i.e. the outer plate – and the inner plate, which prevents
any fogging up of the inner plate.
COATING
The main plate has a HighClear
Note:
The helmet should never be used to hold gloves or any other objects
as this may damage the scratch-sensitive anti-fog lens.
Note:
The anti-fog lens is supplied with a protective film.
Remove this film before using the helmet for the first time.
Note:
The anti-fog lens may only be used in conjunction with the
SCHUBERTH main face shield that has been specially designed for
this purpose. Other face shields must not be fitted.
OPENING THE FACE SHIELD
To open the face shield, use your thumb
to push the face shield up using one of the
finger tabs situated to the left and right of
the face shield, and move it to the desired
position.
22
anti-scratch coating on both sides.
®