SCHUBERTH E1 Manual Del Usuario página 54

H. MAINTENANCE AND CARE
5. Set the pin for the vent cap to
match the connector system for the
ventilation mechanism precisely, and
to assemble insert the vent cap into
the assembly until an audible "click"
is heard. Please ensure that all four
mounting points are snapped in.
6. DUST FILTER
1. Take dust filter out from behind the chin ventilation.
2. Rinse out the dust filter with cold water and, if necessary, use a mild
soapy solution. Let the dust filter dry at room temperature.
3. Re-insert after drying.
7. LOCKING SYSTEM
The metal components of the locking system do not require maintenance.
8. STORING THE HELMET
When not in use, keep the helmet in the supplied helmet bag in a dry, safe
place. Always store the helmet so that there is no risk of it falling onto the
floor. Damage caused this way is not covered by the guarantee.
Note:
Store the helmet out of reach of children and animals.
Note:
The active anti-fog coating also absorbs other chemical substances
such as solvents and can be damaged by them. Therefore, avoid storing
the face shield and sun visor in the vicinity of aggressive substances
such as motor fuels.
54