SCHUBERTH E1 Manual Del Usuario página 41

E. PUTTING THE HELMET ON
AND TAKING IT OFF
Note:
Please note the information on the handling of the chin strap.
1. PUTTING ON THE HELMET
1. Open and lock the chin bar. Make sure the sun visor is retracted into
the helmet shell.
2. Open the chinstrap and chinstrap comfort pad.
3. Pull apart the lower ends of the chinstrap.
4. It will now be easy to put the helmet on.
5. Close the chinstrap comfort pad (with the Velcro fastener).
6. Fasten the chinstrap.
7. Make sure the chinstrap passes under the chin and fits snugly.
8. Swing the chin bar down until you hear both locks close.
9. Check that the chin section is securely locked by pressing it up from
below.
Note:
Check that the chinstrap fits correctly and is adjusted to the correct
length at regular intervals.
Caution:
Never ride with the chin bar raised!
EN
41