SCHUBERTH E1 Manual Del Usuario página 35

3. Zip up the zipper.
4. Mount the cheek pad using the three
pins on the red plugs and sockets.
Ensure that the head strap cushion's
plastic strap with the round holes is
inserted over the rear cheek cushion
pin.
5. Repeat points 1 to 4 to mount the
cheek pad on the other side.
6. Reinsert the neck collar by first
inserting the guide pins into the front
plugs and sockets on the lower helmet
edge on both sides and then mount the
neck collar into the guide gap piece by
piece.
EN
35