SCHUBERTH E1 Manual Del Usuario página 51

3. FACE SHIELD AND SUN VISOR
OUTER SURFACE OF THE FACE SHIELD
Use a soft cloth and a mild soap solution (< 20 °C) to remove dirt from the
outside of the face shield. To dry the face shield, use a lint-free cloth and
apply gentle pressure.
ANTI-FOG LENS
The inside surface of the anti-fog lens must only be cleaned with a soft cloth,
which may be slightly dampened if required (we recommend a mocrofibre
cloth). Do not use any cleaning agents.
SUN VISOR
The sun visor should only be cleaned with a soft and, if necessary, slightly
damp cloth (we recommend a microfibre cloth). Do not use any cleaning
agents.
Note:
Only use tepid water (< 20 °C) for cleaning. Never on any account
clean the face shield or sun visor with petrol, solvent, a window or glass
cleaner or other cleaning agents containing alcohol.
Note:
The face shield should not be soaked in water even if it is very dirty on
the outside, as this will severely reduce the surface hardness and thus
the durability of the anti-fog/anti-scratch coating.
Note:
The face shield should not be completely closed when not in use
(particularly during periods of storage), as the moisture contained
on the inside cannot escape if closed and will largely be absorbed by
the anti-fog/anti-scratch coating. This can lead to a reduction in the
lifespan of the coating. Ideally, position the face shield in the third
locking setting above the urban position.
EN
51