SCHUBERTH E1 Manual Del Usuario página 21

ASSEMBLY
Use both hands to guide the snap-in pins on
the shield into the slots provided for them in
the visor mechanism, then close the bayonet
fastening.
Note:
Check that the shield is firmly seated before you next use it.
Tip:
You can also use the helmet without the shield.
The fastening pins included in the scope of the delivery can be inserted
into the now-visible shield mechanism, after the shield has been
removed.
Furthermore, it is possible to use the helmet without the face shield but
with the shield. For this combination, SCHUBERTH recommends that
you wear safety glasses.
EN
21