SCHUBERTH E1 Manual Del Usuario página 23

Face shield (including urban position)
The face shield can be locked in any one of seven positions. The second
position (urban position) locks in place more firmly, providing greater
resistance when the face shield is in this position. This makes it easier
to lock the face shield in the urban position, especially while riding.
• When you push the face shield open, it may well travel beyond the
urban position
• but it is easy to find this position by moving it downwards again. The
face shield mechanism requires no additional lubrication. The face shield
can be operated at any time irrespective of the position of the sun visor.
CLOSING THE FACE SHIELD
To close the face shield, grip the finger tabs at top
left and right and press the face shield down with one
movement until it audibly locks into place.
REPLACING THE VISOR SHIELD
Changing the face shield is easy to do without tools using the convenient
EasyChange mechanism. To do so, the shield must be dismantled. To replace
the face shield, it is helpful to place the helmet on a flat surface or on your
lap while seated.
Removing the face shield
1. Move the face shield into the
uppermost locked position.
EN
23