marposs TESTAR Quick read M Manual De Instalacion Y Uso página 192

STRING

H
DSTAR
Figure 2 : Strings of Request/Command to a Single Station
STRING

00Z
00DMAX
00DMIN
00DDIFF
00DMEAN
00DSEMI
00DCYCL
00DSTOP

00H
00DSTAR
00QRBIN
Figure 3 : Strings of Request/Command to All Stations
6.
Selection strings
6.1 Select Unit
They are dedicated to network transmission between host and various QuickRead units, even if
they can be used with only one QuickRead station.
Start/Stop for Hold Cycle to a Selected QuickRead
Select Dynamic Type Measure or Start/Stop for Hold Cycle

from Local Parameter Programmable MeasType to a Selected
QuickRead
Zeroing Request to All QuickRead Units
Select Dynamic Type Measure of Maximum to All QuickRead

Units
Select Dynamic Type Measure of Minimum to All QuickRead

Units
Select Dynamic Type Measure of Maximum – Minimum to All

QuickRead Units
Select Dynamic Type Measure of (Maximum + Minimum)/2 to

All QuickRead Units
Select Dynamic Type Measure of (Maximum – Minimum)/2 to

All QuickRead Units
Start/Stop for Dynamic Cycle of Selected Measure to All

QuickRead Units

Stop for Any Dynamic Measure Cycle to All QuickRead Units
Start/Stop for Hold Cycle to All QuickRead Units
Select Dynamic Type Measure or Start/Stop for Hold Cycle

from Local Parameter Programmable MeasType to All
QuickRead Units

Request of Passing to QrBin Protocol to All QuickRead Units
SHORT DESCRIPTION
SHORT DESCRIPTION