marposs TESTAR Quick read M Manual De Instalacion Y Uso página 39

I
Feed voltage
Voltage variation
Max. consumption
N° of connectable sensors
Measuring range
DIGITAL DISPLAY
Resolution
Type
Character dimensions
Number of characters
Color of characters
ANALOGIC DISPLAY
Scale
Resolution
Type
Number of LED
LED dimensions
LED colors
Measurement multiplying
coefficient
Accuracy
Measurement thermal drift
Output
Protection level
(CEI/IEC 529 - DIN VDE
0470-1)
Working temperature
Storage temperature
Relative humidity degree:
 working
 storage
Connector for the measuring
sensor
(*) TESTAR/MARPOSS standard.
For third parties transducer compatibility please contact the nearest MARPOSS office.
Technical data
7 - 7,5 Vdc
 5%
0,3 A
1 or 2 half-bridge (*)
 0,250 mm (.010");  0,500 mm (.020");  1 mm (.040") ; 
2,5 mm (.100") ;  5 mm (.200").
0,1 m (.00001") or 1 µm (.00005") for measuring range up to
 1 mm (.04" )
1 m (.00005") for range  2,5 mm (.10" ) and  5 mm (.20" )
alphanumeric with 7x5 points matrix
3,7 x 2,1 mm / .145" x .082" (HxL)
8
Green
0,010 mm (.00050") ; 0,020 mm (.00100") ;
0,050 mm (.00250") ; 0,100 mm (.00500") ;
0,250 mm (.01000") ; 0,500 mm (.02500") ;
1,000 mm (.05000") ; 2,500 mm (.10000") ;
5,000 mm (.25000") ; 10,00 mm (.50000") ; auto
1/10 of the programmed scale, from 1m (.00005") to 1,000
mm (.050")
LED
21
5x1,75 mm / .197" x .069" (HxL)
red, green, yellow (automatic switching)
-2 to +2 with 0.001 step
 (1% reading value + resolution)
0,1 m/°C for measuring range up to  1 mm (.04")
0,2 m/°C for measuring range  2,5 mm (.10") and 5 mm
(.20")
RS232
IP50
0 ÷ 50 °C
-40 ÷ 50 °C
95 %
95 %
Lumberg KV60 DIN 45322 (6 pin)
Chapter 2. Technical characteristics 39