marposs TESTAR Quick read M Manual De Instalacion Y Uso página 202

00H
Request from Host
Response from QuickRead(s)
Start/Stop for Hold Cycle.
All QuickRead(s) check the possibility and subsequently perform the start/stop for hold
cycle.
All QuickRead(s) do not return any message.
In case of error QuickRead abort the request.
st
On 1 command (Start), all QuickRead(s) are frozen on the last value of static measure.
nd
On 2 command (Stop), all QuickRead(s) display the static value of measure and so on.
00DSTAR
Request from Host
Response from QuickRead(s)
Select Dynamic Type Measure or Start/Stop for Hold Cycle.
All QuickRead(s) check the possibility and subsequently select dynamic type measure or
performs the start/stop for hold cycle depending on its programming.
All QuickRead(s) do not return any message.
In case of error QuickRead abort the request.
If "dynamic" mode is programmed All QuickRead(s) enter on dynamic measure select mode.
If "hold" mode is programmed All QuickRead(s) enter on hold cycle mode.
00QRBIN
Request from Host
Response from QuickRead(s)
Request of Passing to QrBin Protocol.
All QuickRead(s) check the possibility and subsequently perform the passing to QrBin
protocol.
All QuickRead(s) do not return any message.
In case of error QuickRead abort the request.
9.
Formatting of numerical string
In the QuickRead functioning both in the metric and imperial system, the measuring string is
formatted on 8 bytes and ends with .
The first character representing the measuring sign can be : + , , - .
The second character is a digit ranging from 0 to 9 .
The characters from 3 to 8 can be represented by a digit from 0 to 9 or by a decimal point . .
Example : Metric system, measure in millimetres ( -000.123 )
Request from Host
Response from QuickRead

00H

00DSTAR

00QRBIN

?

-000.123