marposs TESTAR Quick read M Manual De Instalacion Y Uso página 46

ENGLISH
( continue ...)
( continue ...)
46
CHOICE
Choice of the measurement type:
- static (hold; static)
- dynamic [Max; min; M-m; (M+m)/2; (M-m)/2]
CHOICE
Choice of the full scale value of the analog display.
CHOICE
Choice of the pretravel check on/off for the
transducer 1.
Programming of the pretravel limit value. If
VALUE
M.RESOL = high, the value is programmed with
0,0001 mm resolution. If M.RESOL = low, the
value is programmed with 0,001 mm resolution.
CHOICE Choice of the pretravel check on/off for the
transducer 2. This variable appears in the main
menu only if PROBE=Probe 1&2.
Programming of the pretravel limit value. If
VALUE
M.RESOL = high, the value is programmed with
0,0001 mm resolution. If M.RESOL = low, the
value is programmed with 0,001 mm resolution.
VALUE
Programming of the multiplying coefficient of the
transducer signal 1.
Step 0,001
VALUE
Programming of the multiplying coefficient of the
transducer signal 2. This variable appears in the
main menu only if PROBE=Probe 1&2.
Step 0,001
Tabella 5