2. PRODUCT DESCRIPTION
Control unit for the management of two-phase motors dedicated to the movement of sliding gates.
The card has inputs for the connection of control and safety devices, and outputs for the management of flashing and courtesy
light. The board is compatible with the connection of electro-mechanical limit switches.
Integrated radio receiver for control by 433,92 MHz remote controls.
2.1 - INTENDED USE
Control unit for gear motors with two-phase electric motors, installed on sliding gates.
Any installation or use other than as indicated in the following manual is prohibited.
2.2 - TECHNICAL CHARACTERISTICS
Commercial name
Construction of the device
Purpose of the device
Software Class
Power supply voltage (Valim)
Power consumption in standby mode
Motor output (Vout)
Auxiliary power supply output (Vaux)
Courtesy light output (3-4)
Flashing light output (3-5)
Insulation class
Degree of pollution
Frequency of radio communication
Compatible remote controls
Number of remote controls that can be stored
Environmental operating conditions
Conditions of transport and storage
6 - English - Translated from the original language
DANGER
BIOS1 230V RNS
Electronic control device to be incorporated
Operating control device (non-safety)
230 Vac ± 10% 50/60 Hz
50 mA
Vout = Valim MAX 700W
24Vdc MAX 170mA (4W)
Rolling Code, HR protocol
TA: -20...+55 °C RH max 90% non-condensing
TA: -40...+70 °C RH max 90% non-condensing
BIOS1 120V RNS
A
120 Vac ± 10% 50/60 Hz
90 mA
Vout = Valim MAX 350W
V(3-4) = Valim
V(3-5) = Valim
I
2
433,92 Mhz
1000
6-1622467M - rev. 0 - 07/03/2024