Descargar Imprimir esta página

HR Matic BIOS1 RNS HR Serie Manual De Instalacion Y Uso página 69

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintained control function (DEAD-MAN)
Enables the possibility to move the automation only by holding down the desired command. Once the command is released, the
automation stops. Activating this function results in the following functional changes:
The "Step-by-Step" and "Partial Opening" commands are disabled.
All security inputs except "STOP" are disabled.
All automatic operations set, including automatic closures and reversals are disabled.
Remain active commands "OPEN" and "CLOSE" both radio and wired.
PARAMETER
dEA
Cycle threshold for service request
It allows you to set a number of cycles, after which the control unit will signal the achievement of the threshold by replacing the
normal flashing during movements, with a fast flashing.
This parameter shall be used in combination with the parameter "Flashing for service request".
PARAMETER
SEr
Flashing light for assistance request
Enable flashing for service request.
PARAMETER
SEf
Pressure frequency when closed
Enables the function that allows to execute a closing command lasting "MPT" seconds every "MPR" minutes.
This function is activated automatically once the gate reaches the position of "CLOSED GATE".
PARAMETER
MPr
Pressure duration when closed
Determines the duration of the closing command used in the MPR function.
PARAMETER
MPt
Function of Mechanical Relaxation
It allows you to perform a short reversal, the duration of which is customized, once you reach the limit switch of opening or closing.
This function is useful in case automation presses the mechanical blocks too hard and makes manual unlocking difficult.
PARAMETER
MrE
6-1622467M - rev. 1 - 07/03/2024
VALUES
OFF = disabled
ON = enabled
VALUES
OFF = disabled
from 1 to 200 multiplied by 1000 cycles
VALUES
OFF = disabled
ON = enabled
VALUES
OFF = disabled
from 1 to 480 minutes
VALUES
from 1 to 10 seconds
VALUES
OFF = disabled
from 1 to 30 multiplied by 100 ms
DEFAULT
OFF
DEFAULT
OFF
DEFAULT
OFF
DEFAULT
OFF
DEFAULT
1 second
DEFAULT
OFF
Translated from the original language - English - 31

Publicidad

loading

Este manual también es adecuado para:

Bios1 230v rns hrBios1 120v rns hr