Publicidad
Idiomas disponibles
Idiomas disponibles
4.3 - STANDARD VIEW
DISPLAY
Standing by after power supply connection.
--
Automation in CLOSED GATE position.
op
Automation stops in OPEN GATE position, without automatic closing.
PE
Automation stops in the PARTIAL OPENING position, without automatic closing.
OP
Automation in opening movement.
CL
Automation in closing movement.
SO
Opening movement stopped by a user command.
SC
Closing movement stopped by a user command.
HA
Movement stopped by a safety device (EDGE, PH1, PH2 and STOP inputs) or impact sensor.
Automation stops in OPEN GATE position, with automatic closing active.
-tC
In the last 10 seconds the symbol " - " is replaced by the countdown.
Automation stops in OPEN GATE position, with automatic closing after transit active.
-tt
In the last 10 seconds the symbol " - " is replaced by the countdown.
Automation stops in the PARTIAL OPENING position, with automatic closing active.
-tp
In the last 10 seconds the symbol " - " is replaced by the countdown.
LOP
LEARNING OF THE STROKE - learning the opening movement.
LCL
LEARNING OF THE STROKE - learning the closing movement.
LEARNING OF THE STROKE - stand-by process.
L--
Verify that all safety devices are in operation, properly configured and that limit switches are not engaged.
Give a Step-By-Step command to resume the procedure from the beginning.
rad
Waiting for a transmitter to be stored.
don
Procedure successfully completed.
SEE
Control unit waiting for a known radio command to display the memory position.
fnd
Remote control already learned in the radio memory.
CLR
Cancellation of a remote control already learned happened successfully.
toUt
Output from the function in use for TIME-OUT.
6-1622467M - rev. 1 - 07/03/2024
DESCRIPTION
Translated from the original language - English - 17
Publicidad
