Publicidad
Idiomas disponibles
Idiomas disponibles
6. MAINTENANCE
• Before carrying out any cleaning, maintenance or replacement of parts, remove power to the automation.
• The following points are specific to the maintenance of the control panel. The list does not cover mainte-
nance activities specific to the sliding gate/door.
Every 10,000 cycles and in any case every 6 months of activity, the following maintenance interventions are mandatory:
•
Check and clean any dirt, insects and dust residues that have positioned themselves within the automation.
•
Check the integrity of the cables and their connections and make the necessary replacements.
•
Perform a general and complete check of the screws and bolts.
•
Check the proper functioning of signalling and safety devices.
•
Check the wear status of the moving mechanical parts and check their correct functioning.
•
Perform the stroke learning procedure.
7. PRODUCT DISPOSAL
As for installation operations, the disassembly of this product must be carried out by qualified personnel. The symbol
on the side indicates that the product should not be disposed of as unsorted waste, but should be sent to separate
collection facilities for recovery and recycling. For disposal check the recycling or disposal systems provided by the
territorial regulations in force for this category of product, or return the product to the seller.
WARNING - • This product consists of various types of materials: some parts of the product may contain pollutants
or dangerous substances that, if dispersed, could cause harmful effects to the environment and health. • Local
regulations may provide for heavy penalties in the event of incorrect disposal of this product.
8. WARRANTY
The manufacturer's warranty is valid by law from the date printed on the product and is limited to the free repair or replacement of
parts recognized by the manufacturer as defective due to lack of essential qualities in the materials or for errors in the production
process. The warranty does not cover damage or defects due to external agents, lack of maintenance, overload, normal wear,
installation error, or other causes not attributable to the manufacturer. Tampered products will not be covered by warranty. The
manufacturer is not responsible for malfunctions or degradation of performance due to environmental interference, such as
electromagnetic disturbances; therefore, the warranty expires in these situations.
6-1622467M - rev. 1 - 07/03/2024
DANGER
Translated from the original language - English - 37
Publicidad
