Joimax Vaporflex Instrucciones De Uso página 8

joimax component sets as well as individual products are compatible with each other. Before using individual joimax
®
products / sets with other products, the user must ensure the user-specific compatibility of individual products. We recom-
mend introductory training and regular attendance at training events. We are available for any further required information.
joimax has no influence on the application of the product, on the diagnosis of the patient and handling of the product
®
outside of joimax . joimax
®
joimax employees are not entitled to change the previously mentioned conditions, extend liability or enter additional
®
product related obligations. joimax
This document contains information protected by copyright and property law and may not be copied in full or in parts there-
of or transferred to a further medium in any form, without express written permission from joimax
third parties is prohibited. The products and names used here may be the registered brands of joimax
PRIOR TO USE
• The Vaporflex Handle is delivered non-sterile and must be cleaned and sterilized before its first surgical use. Carefully
®
read these instructions before surgical use and please note the specifications of joimax
• A complete sterile joimax
A visual and functional inspection must be carried out prior to every use!
INSTRUCTIONS FOR USE
1. Assemble joimax
2. Select the required program on the HF/RF generator.
3. Adjust the power setting.
It is recommended to start the RF/HF generator with low energy settings. If required, the energy can be gradually
increased. Progress of work must be regularly monitored.
4. Perform a function test as described.
5. Insert the joimax
6. Once the probe tip contacts the tissue to be treated, press the foot switch to activate the connected RF/HF generator.
PROCESSING INSTRUCTIONS
PRETREATMENT
Soaking must be carried out immediately after use (within a maximum of 2 hours). Use water or an aldehyde-free disinfect-
ant for this purpose (to avoid fixation of blood contamination) with proven effectiveness (FDA cleared), which are suitable
for disinfecting instruments and which are compatible with the instruments.
A synthetic fleece or plastic cleaning brush can be used if necessary for the preliminary removal of residue.
Do not pre-clean RF/HF cables and hand pieces in the ultrasonic bath.
A disinfectant used for soaking is only intended for protecting personnel and cannot replace the later disinfecting
step after cleaning has been carried out.
8
cannot guarantee good results nor the complication free application of the products.
®
reserves the right to product changes.
®
Vaporflex Handle with probe should always be available as substitute.
® ®
Vaporflex Handle according to the instructions provided.
® ®
Vaporflex instrument into the appropriate endoscopic working channel.
® ®
GmbH. Distribution to
®
or other companies.
®
GmbH.
®
®