Illumination Output (Nominal); Medical Electrical Classifications; Lithovue Flexscope Fluid Compatibility; System Workstation Device - Accessory Compatibility - Boston Scientific LithoVue Manual Del Usuario

Illumination output (nominal)

table 3�5 Illumination output
Illumination output
Type
Wavelength
Tested per IEC 62471 - Standard for Photobiological Safety of Lamps and Lamp Systems

Medical Electrical classifications

table 3�6 Medical Electrical classifications
The LithoVue™ System meets the requirements of the following standards: IEC 60601-1 and CAN/
CSA-C22.2 No. 60601-1.
Medical Electrical classifications
Type of Protection Against Electric Shock
Degree of Protection Against Electric Shock
Degree of Protection Against Ingress of Liquids,
System Workstation
Degree of Protection Against Ingress of Liquids,
LithoVue Flexscope
Mode of Operation
Suitability for use in oxygen rich environments
Installation and Use

LithoVue Flexscope Fluid compatibility

The LithoVue Flexscope is known to withstand exposure to the following procedural fluids: blood, urine,
saline, contrast media, petroleum-based and water-based lubricants.

System Workstation device - Accessory compatibility

notE: All attached equipment (dVI switcher, external monitor, etc�) must comply with
applicable electrical safety standards� Proper system functioning must be verified before use�
• The System Workstation is ONLY compatible with the LithoVue Flexscope.
• DVI cable - DVI dual-link cables up to 15 feet may be used with this system.
• DVI switcher - DVI dual-link powered switchers may be used with this system. The LithoVue System
has been tested and shown to be compatible with the Extron DVI Switcher (P/N 60-964-01).
• Monitor compatibility requirements - Must have a DVI input and a minimum resolution of 1280 x 1024
at any of the following aspect ratios: 5:4 and 16:9. The LithoVue System has been tested and shown
to be compatible with the NDS Radiance SC-SX19-A1511.

Software Information

The software revision level is controlled by Boston Scientific. The current revision level is provided
below the BSC logo on the System Workstation display.
User's Manual
LED
375-800 nm
Class 1 equipment
Type BF Applied Part (LithoVue Flexscope)
IPX0
IPX2
Continuous Operation
Equipment not suitable for use in the
presence of flammable mixtures
Mode
23
Black (K) ∆E ≤5.0