CAUTION
Manual unlocking of elbow lock under load
Injury by release of elbow lock under load.
► Particular caution should be exercised when unlocking the elbow lock while lifting heavy loads.
► Be careful when unlocking the lock under such conditions due to the possibility of injury.
CAUTION
Penetration of dirt and moisture
Injury due to faulty control or malfunction of the Axon-Bus prosthethic system.
► Do not let foreign particles or liquids get into the prosthetic arm.
► Do not expose the prosthetic arm, especially the elbow joint, to dripping or splashing water.
► Wear the prosthetic arm and especially the elbow joint under suitably resistant clothing in the rain.
NOTICE
Coating, gluing or painting the product
Damage or fracture due to chemical processes.
► The product must not be coated, glued or painted.
5 Scope of Delivery
Piece
Product name
(s)
1
12K500 AxonArm Hybrid or 12K501 AxonArm Ergo
1
Cable Lock
1
Lamination Ring (installed on AxonArm)
1
Lamination Protection Cover (hollow ball)
1
Lamination Protection Cover (disc with arrow)
1
13Z146 Lamination Ring for Axon-Bus gripping component
1
Spherical Cord Lock
2
Tongue Cap
4
Cable Ties 420mm x 4mm
1
Clamp Ring
4
Fixing Brackets
4
Self-Tapping Pan Head Screws
1
647G790 Instructions for Use
1
3.3.6 Technical Information (646T3=3.6-DE Casting and Lamination Instructions)
1
3.3.6 Technical Information (646T3=3.6-EN Casting and Lamination Instructions)
INFORMATION
The clamp ring, mounting brackets and pan head screws are also available as a set, "Alignment Aid for Elbow
Components" under reference number 743A23.
INFORMATION
Only gripping components of the Axon-Bus prosthethic system, e.g. the 8E500 Michelangelo Hand, can be used
with the 12K500 AxonArm Hybrid/12K501 AxonArm Ergo. Other gripping components may not be used.
6 Preparation for Use
For the fabrication of the patient's socket and cutting the forearm socket to length, consult the 646T3=3.6 Technic
al Information.
AxonArm Hybrid 12K500=*, AxonArm Ergo 12K501=*
Scope of Delivery
Ottobock | 27