Abaxis VETSCAN VS2 Manual Del Usuario página 107

11. Note the port number to which the analyzer is assigned,
and record this number. You will use this port number
later in this procedure.
(In the example at right, the port is
12. Close the Device Manager.
13. Click
Start > Run
.
hypertrm
This opens the HyperTerminal window.
14. In the Connection Description dialog, enter VS2, then
click .
OK
15. In the Connect To dialog that opens, use the Connect
using pull-down menu to select the COM port you found
earlier.
16. Click .
OK
COM4
, and in the dialog enter
Connecting to an External Computer
.)
11-5