Configuring Printers - Abaxis VETSCAN VS2 Manual Del Usuario

b.
c.

5.12 Configuring Printers

Use these procedures to set up and configure the analyzer's internal printer, or an external printer con-
nected to the analyzer.
1. In the Home screen, touch the Settings icon.
2. Touch the Printer Settings icon.
3. You can now do the following:
To select the default printer to be used with the analyzer, see

below.
To test a printer for proper function, see

To select which reports can be printed automatically after an

analysis, see
5-24
Use the controls to set the delay.
Use the up ( 

adjust the delay.
Touch to prevent the analyzer from entering

Never
power-saving mode.
Touch

Default
Touch to store the new setting.
Save
page 5-26.
Configuring the Analyzer
) and down (  ) arrow keys to
to set the delay to its factory default.
page 5-26.