1.
In the Home screen, touch
2.
Insert the control sample into the reagent rotor (see
the rotor into the drawer.
3.
Touch
Close
4.
Enter the Operator ID using the touchscreen, then touch
Done
The operator ID is a number of up to 14 digits that is assigned
by the facility.
The right arrow key (
arrow key (
5.
Select the control type to use.
Use the up (
through the list.
6.
Enter an ID number for the sample (up to 14 characters), then touch
.
Done
The right arrow key (
key (
) functions as a backspace.
7-4
Analyze
to close the drawer and start analysis.
.
) functions as a dash (–), and the left
) functions as a backspace.
) and down (
) arrow keys as needed to scroll
) functions as a dash (–), and the left arrow
Calibration and Quality Control
to open the rotor drawer.
"Running Tests" on page
4-4), and place