Abaxis VETSCAN VS2 Manual Del Usuario página 70

5.12.2 Testing a Printer
Test the function of the analyzer's printer or a connected external printer as follows.
1. In the Printer Setup screen, touch
2. Select the printer to test.
The selected printer then outputs a test page.
5.12.3 Printers Supported by the VetScan VS2
For a list of printers supported by the VS2 as of October 2012, see
Note: Printer capabilities are subject to change without notice. For an up-to-date list of print-
ers supported by the VetScan VS2, contact Abaxis Technical Support 24 hours a day, 7
days a week, at 1-800-822-2947.
5.12.4 Selecting Reports
Use this procedure to set the type and number of reports that can be printed automatically after a sam-
ple is analyzed.
1. In the Printer Setup screen, touch
2. Touch
Select Reports
5-26
.
Test
Configure
.
Configuring the Analyzer
"Supported Printers" on page
.
B-1.