Abaxis VETSCAN VS2 Manual Del Usuario página 114

4. Click
Restart
5. Connect the USB cable to a Type A connector on the Mac and to the uppermost USB con-
nector (Type B) on the back of the analyzer.
6. Turn on the analyzer.
7. Use the Network section in the System Pref-
erences application (
System Preferences > Network
the virtual communications port. Click
8. Select
Network Port Configurations
the Show list.
9. Enable the new port
(usbserial-1B22 in the example at
right) by checking its
ing
Apply Now
10. Configure any needed applications to
communicate with the analyzer over the
virtual communication port.
11-12
.
Go > Applications >
) to enable
box and click-
On
.
Connecting to an External Computer
.
OK
from