Abaxis VETSCAN VS2 Manual Del Usuario página 36

Note: In the Load Rotor screen, touch the information icon
screens outlining the basic analysis procedure. (Touch
the screens, and
11. Place the rotor in the recessed area in the drawer.
12. Touch
Close
drawer.
13. Enter the operator ID using the touchscreen, then touch
Done
The operator ID is a string of up to 14 characters that is assigned by
the facility.
The right arrow key (
key (  ) functions as a backspace.
4-8
to close them.)
Exit
on the touchscreen. The analyzer then closes the
.
 ) functions as a dash (–), and the left arrow
Test Procedure and Results
to view additional help
Next and Back to move through