Abaxis VETSCAN VS2 Manual Del Usuario página 50

3. Touch
Species 1
species,
Control 1
to create a reference range for a predefined species.
Select
To create a reference range for a new, unnamed species:

a.
b.
Note: Entering zero for both values suppresses printing ranges for this analyte in results
(blanks appear instead), and also suppresses checking the recovered value against the
range limits.
c.
5-6
to create a reference range for a new, unnamed
to create a range for a new control level, or
Touch .
Species 1
Set minimum and maximum values for each of the ana-
lytes to be included in the range:
i. Select the analyte to adjust. If needed, use the up
(  ) and down (
the list.
ii. Use the controls to set upper and lower limits for the
analyte.
Use the up (

adjust the values.
Touch

Clear
Touch

Default
for the range.
Touch to store the changes.
Save
Configuring the Analyzer
 ) arrow keys to scroll through
) and down (
 
to set both limits to zero.
to use the factory default values
) arrow keys to