Adjusting The Display - Abaxis VETSCAN VS2 Manual Del Usuario

5.11 Adjusting the Display

You can adjust the brightness of the analyzer's display as needed, and set the period that the analyzer
must be inactive before it activates a screen saver or enters power-saving mode. (For either, touch the
screen to wake the analyzer.)
1. In the Home screen, touch the Settings icon.
2. Touch the Display Settings icon.
3. Adjust or calibrate the display as follows.
To adjust the backlight brightness:

a.
b.
c.
5-22
Touch .
Back Light
Use the controls to set the brightness:
Use the up ( 

adjust the brightness level.
Touch to select maximum brightness.

Full
Touch

Default
default.
Touch to store the new setting.
Save
Configuring the Analyzer
) and down (  ) arrow keys to
to set the brightness to its factory