Switching The Product On And Off; Opening The Axon-Bus Gripping Component In An Emergency; Proper Handling Of The Axon-Bus Gripping Component - Ottobock 8E600 Instrucciones De Uso

Separating the Axon-Bus gripping component from the socket

8.2 Switching the product on and off

CAUTION
Storage of the product in the closed state
Injury due to faulty control or malfunction of the product as a result of damage to the sensors
and mechanism.
► Store the product only in the neutral position or in the open state.

8.3 Opening the Axon-Bus gripping component in an emergency

8.4 Proper handling of the Axon-Bus gripping component

Hand flexion, hand extension procedure
This function enables the flexion or extension of the Axon-Bus gripping component.
22 | Ottobock
1) To switch off the Axon-Bus prosthetic system, press the charging
receptacle button and hold for more than one second.
2) Press both unlock buttons on the flexion wrist unit.
INFORMATION: For safety reasons the Axon-Bus gripping
component cannot be removed if only one unlock button is
pressed.
3) Separate the Axon-Bus gripping component from the socket.
The product is switched on and off by pressing the button in the char­
ging receptacle on the outside of the socket.
This safety function allows the Axon-Bus gripping component to be
opened regardless of the control signals present.
1) With the Axon-Bus prosthetic system switched on, press the char­
ging receptacle button and hold for approximately three seconds
until the Axon-Bus gripping component begins to open.
→ A pulsating beep sounds as it opens.
2) Releasing the button immediately stops the process of opening
the Axon-Bus gripping component and turns the entire Axon-Bus
prosthetic system off.