Management Menu; Overview Of First-Degree Menus - ADInstruments AD300 Manual De Usuario

_____________________________________________________________________
2.9.2 The monitor hinge may become too tight and makes it hard for
the monitor to turn. To fix this problem, drop some lubricating
oil to the monitor hinges as is shown in the following picture; do
not tighten the monitor hinge screws.

3. Management Menu

The details of managing the options of AD300 Series Fusion Splicer
are described in this chapter.
3.1 Overview of Frist-degree Menus
3.1.1 Four Frist-degree Menus are arranged on the operation interface
of AD300 Series Fusion Splicer, and a number of options are
listed in each Frist-degree Menu.
3.1.2 Press
modes or after completion of splice to enter "Splice Mode
©Copyright Abacanto Digital SA.
at [standby] state of the current splice, heating
Manual de usuario AD300
AD Instruments
113
Hinge
screws