Stabilizing Electrodes - ADInstruments AD300 Manual De Usuario

_____________________________________________________________________
Replace Electrodes
<1> Execute [Replace Electrode] in [Maintenance Menu 1].
<2> Instruction messages will appear on the screen to turn off the power.
Press and hold
<3> Remove the old electrodes and Method for tearing:
a. Loosen screw located on electrode cover.
b.Take electrode out of electrode cover. (Electrode is fixed in the
electrode cover)
<4> Clean the new electrodes with alcohol-impregnated clean gauze or
lint-free tissue and install them in the splicer.
<5> Place the electrode cover and tighten screw
z Do not pull out wiring when replacing electrode.
z The tightening of the screw should not exceed the strength of fingers.

5.6 Stabilizing Electrodes

In the event of sudden change in environmental conditions, etc., the
arc power sometimes becomes unstable, resulting in higher splice loss.
©Copyright Abacanto Digital SA.
till the LED color changes from green to red.
Manual de usuario AD300
AD Instruments
171