ADInstruments AD300 Manual De Usuario página 120

_____________________________________________________________________
X image focus
Y image focus
Fiber leaning core
compensation function
Arc auto adjustment
Proof Test
<3> The third screen in the "editing splice mode" menu:
Parameter
Cleave Limit
Loss Limit
Core Angle Limit
©Copyright Abacanto Digital SA.
This function is set as "Auto" and can not be changed
by the user. Each time before fibers are forwarded and
aligned, left and right fibers are focused independently;
therefore optimum focusing can be achieved even if
different fibers are spliced (dissimilar fiber splicing).
This function is set as "Auto" and can not be changed
by the user. See X image focus.
This fuction is set as "auto" and can not be changed by
the user.
This fuction is set as "off" and can not be changed by
the user.
If [Proof Test] is set to "ON", a proof-test is performed
automatically.
An error message is displayed if the cleave angle of
either the left or right fiber ends exceed the selected
threshold (cleave limit).
An error message is displayed if the estimated splice
loss exceeds the selected threshold (loss limit).
An error message is displayed on the screen if the bend
angle of the two fibers spliced exceeds the selected
threshold (Core Angle Limit).
Manual de usuario AD300
AD Instruments
Description
120