Menu Lock - ADInstruments AD300 Manual De Usuario

_____________________________________________________________________
The details are shown in the following table.
Parameter
Sleeping The user can set the "sleeping" wait time or close the
"sleeping" function. The Fusion Splicer turns off the power
supply to the LCD monitor if the splicer performs no operation
after a certain period of time. Thus the power dissipation is
reduced to too much loss of battery capacity. When the power
supply to the LCD monitor turns off, the LED indicator near the
key turns green; Press any key to activate the machine and
resume the work. Then the LED indicator near the
red. The scope for sleeping wait time is 10~59 minutes.
Auto Off When this option is activate and Auto Off wait time is set, the
Fusion Splicer automatically turns off the power if the splicer
performs no operation after a certain period of time. The scope
for sleeping wait time is 10~119minutes.

3.3.3 Menu Lock

In order to avoid parameter changes of the Fusion Splicer due to
mishandling, which will reduce splice quality, the administer of
the Fusion Splicer can lock some menus of the Fusion Splicer.
This performance needs password. Notes: the initial password
of the Menu Lock is the sequence number of the machine.
<1> In the Application Menu, press
the cursor to select [Menu Lock]. Press
Password screen is displayed. See the following pictures.
Password Input method is described in Chapter 4.8
[Application of Soft Keyboard].
<2> Input the correct password. The following screen appears.
©Copyright Abacanto Digital SA.
Description
Manual de usuario AD300
AD Instruments
key turns
or and move
, and the Input
145