APRILIA SR 50 Manual De Taller página 20

,5"2)#!.4 #(!24
Transmission oil (recommended):
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or
superior to the A.P.I. GL4 specifications.
2 stroke oil (recommended):
Use high-quality oils with characteristics in compliance with or superior to the ISO-L-ETC++, A.P.I. TC++ specifications.
0
Fork oil (recommended):
If you need an oil with intermediate characteristics in comparison with the two recommended products, these can be mixed
as indicated below:
0
SAE 10W F.A. 5W 67% of the volume, +
0
SAE 15W F.A. 5W 33% of the volume, +
Bearings and other lubrication points (recommended):
As an alternative to the recommended product, use high-quality grease for rolling bearings, working temperature range
-30 °C...+140 °C, dripping point 150 °C...230 °C, high protection against corrosion, good to water and oxidation resi-
stance.
Protection of the battery poles: neutral grease or vaseline.
Spray grease for chains (recommended):
Brake fluid (recommended):
a
WARNING
Use new brake fluid only.
Engine coolant (recommended)
a
WARNING
Use only antifreeze and anticorrosive without nitrite, ensuring protection at -35 °C at least.
0
F.C., SAE 75W - 90.
0
GREEN HIT.
0
F.A. 5W or F.A. 20W fork oil.
0
F.A. 20W 33% of the volume.
0
F.A. 20W 67% of the volume.
0
CHAIN SPRAY.
0
F.F., DOT 5 (DOT 4 compatible).
0
1
: ECOBLU -40 °C.
0
AUTOGREASE MP.
19
SR 50