Appliance Description; View Of The Appliance Food Transport Trolley - Hupfer SPTW-2/EBF/TEHCO Manual De Instrucciones

Description and Technical Data

Appliance Description

3.4 Appliance Description
3.4.1

View of the appliance food transport trolley

Figure 1
1 Plate dispensing tube with cover
2 Storage place for ladles
3 1/3 Cover element, open
4 Neutral cupboard compartment
5 Heated cupboard with beads
6 Swivel caster without total brake
7 Swivel caster with total brake
3.4.2 Appliance Description
Food transport trolleys are equipped with two heated bain-marie wells and two heated cupboard compart-
ments. They hold up prepared meals in Gastronorm containers and keep them warm. It is also possible to
switch off the heated cupboard compartments and use these in combination with a cold storage plate as
cooling compartments. The thermal insulation of the mobile bain-marie ensures the efficacy of the bain-marie
wells above these compartments and the adjacent heated cupboards is not impaired.
The bain-marie wells are filled with water up to the fill level indicator and heated by a foil heater. The gener-
ating water vapour heats up the inserted Gastronorm containers. The heating element and electrical parts
are easy to be accessed and can be dismantled without any problems. The bain-marie wells can be emptied
by the water drain taps after the operation.
The operating temperature for each bain-marie well and each heated cupboard compartment can be chosen
separately. Using the continuously adjustable thermostats located on the front of the food transport trolley it
is possible to separately adjust the operating temperature of each individual bain-marie well and cupboard
compartment. Digits on the thermostats indicate the corresponding bain-marie wells and heated cupboard
compartments.
The lids can be opened to the left and the right. The smaller 1/3 element with a removable perforated plate
opens to the left and is locked in position at 180° by two supports. It can be used for serving plates, filling of
soup bowls and to hold up ladles. The bigger 2/3 element is opened to the right and it is equipped with a
condensate collecting channel on the inner side. When it is opened to an angle of 270° it can be used to hold
gastronorm container lids. It is not possible to lock it in an angle of 180°.
The plate dispensing tube holds clean plates made of porcelain or toughened glass in an adjustable, spring-
loaded guide basket. Special springs ensure crockery items are automatically and constantly moved up the
entire lift to a uniform dispensing height. The ergonomically favourable dispensing height can be adjusted
within a limit to persons of different height. The plastic cover used to cover the plate dispensing tube effec-
tively protects loaded crockery against dust and condensation even during relatively long periods of tempo-
91319926_A0
View of the appliance SPTW-2/EBF/TEHCO
9
10
8 Corner bumper
Thermostat for setting the temperature*
Connecting lead with mains plug
11 On / Off switch
12 Push bar
13 Bain-marie wells
14 2/3 Cover element, closed
Chapter 3
Page 13
Food transport trolley
SPTW-2/EBF/TEHCO