Safety Recommendations - Sincro HB 2 Manual Para El Uso Y Mantenimiento

1. SAFETY RECOMMENDATIONS

We thank you for having chosen a Sincro product, and we are sure that
it will satisfy all your expectations in high standards and performance.
The "User and Maintenance Manual" included with the generator
provides important indications regarding safety, installation, use and
maintenance. This product complies with recognised standards in good
engineering and provisions related to safety.
When contacting Sincro Srl, always quote the generator type and code,
found on the label attached to the packing. Whatʼs more, in the event of
malfunction or any other kind of machine fault that should require our
Aftersales Service, please specify the serial number (SN) and pro-
duction order (PO).
CAUTION! An incorrect installation or improper use of the prod-
uct may cause damage to persons and objects.
• Strictly observe the instructions given in the "User and Maintenance
Manual" that is provided to indicate the correct conditions for instal-
lation, use and maintenance, in order to prevent malfunctions in the
generator and avoid hazardous situations for the user.
• Dispose of all packing material (i.e. plastic, cardboard, polystyrene,
etc.) according to statutory regulations.
• Keep the instructions with the technical folder and for future consul-
tation.
• This product has been designed and constructed solely for the appli-
cations indicated in this manual. Any use not specified in this manual
may cause damage to the product and become a source of hazard.
• Sincro S.r.l. declines all liability arising from any use whether improper
or differing from its original concept and specified in this manual.
• Do not install the product in a potentially explosive atmosphere.
• The plant component elements must comply with European Directives.
To ensure good safety levels, these standards should also be observed
in non-EEC countries, in addition to the country specific statutory regu-
lations.
• The installation must comply with European Directives and must be
carried out solely by qualified specialists.
• Do not start up the generator if the protective covers, the access panels
or the terminal box cover have been removed.
• Before starting any maintenance work shut off the motor power cir-
cuit.
• Shut off the actuator circuits and/or place warning decals on all circuit
breakers normally used for connecting the mains or other generators,
in order to prevent them from being switched accidentally.
• Only use genuine parts for any maintenance or repair. Failure to ob-
serve this recommendation shall free Sincro S.r.l. from all responsibility
related to the generator safety and good operation.
• Train the plant operator in the management, use and maintenance of
the generator.
• Anything not expressly prescribed in these instructions is prohibited.
This manual uses various symbols and terms that have a precise mean-
ing. These are clearly defined below.
Important! This refers to risk conditions or to hazardous procedures
that could cause damage to the product or connected equipment.
Caution! This refers to risk conditions or hazardous procedures that
could cause damage to the product or injury to persons.
Exclamation mark symbol: This symbol signals risk conditions or
hazardous procedures that COULD cause severe injury or death.
Important!
This refers to risk conditions or to
hazardous procedures that could cause
damage to the product or connected
equipment.
Caution!
This refers to risk conditions or hazardous
procedures that could cause damage to
the product or injury to persons.
This symbol signals risk conditions or
hazardous procedures that COULD cause
severe injury or death.
WARNING!
HB - Maggio 2004 - Rev. 00 - 17
ENGLISH