NEC SpectraView II Guia Del Usuario página 32

31 | NEC SPECTRAVIEW II - USER'S GUIDE
Information window - Curves tab
The Curves tab graphically illustrates the various tone response and correction curves measured and generated during
the calibration process.
Show Curve Type
Target - illustrates the target tonal response curve of the currently selected Target. This display will be calibrated to
match this curve. This curve will be disabled and not shown if the Target Gamma is set to Monitor Native Gamma.
Calibrated - illustrates the actual measured tonal response curves of the calibrated display. These curves are
generated from measurements taken while generating an ICC/ColorSync monitor profile of the display. If no ICC/
ColorSync profile was generated after the monitor was calibrated, then this checkbox will be disabled.
Uncalibrated - illustrates the actual measured tonal response curves of the uncalibrated display, without any
corrections applied to the Look Up Tables. These curves are generated from measurements taken during the
calibration process.
Correction - illustrates the correction that is applied to the display's Look Up Tables in order to achieve the selected
Target tonal response curve characteristics.
Note:
The Uncalibrated and Correction curves are not available for displays equipped with the SpectraView Engine (SVE)
because they are calculated internally by the SVE. Refer to the "SpectraView Engine" column in the "Features by Model"
tables on page 58 and page 60 for the specific capabilities of each display model.
Show Curve Color
The All, Red, Green and Blue buttons select which curve colors are displayed on the graph.