Using Spectraview; Launching; Selecting A Calibration Target; Modifying Targets - NEC SpectraView II Guia Del Usuario

46 | NEC SPECTRAVIEW II - USER'S GUIDE
Chapter
4

Using SpectraView

Launching

Application Icon
macOS: Double click the SpectraView II application icon in the Applications folder.
Windows: Select SpectraView II from the NEC Display Solutions program group on the Windows Start menu.
As SpectraView launches, it will automatically search for any supported displays, and supported color sensors.
If SpectraView is unable to detect either a supported display or a supported color sensor, an error message will be
displayed and the Calibrate button will be disabled. Refer to the Troubleshooting section of this manual.

Selecting a calibration Target

A Target specifies the color characteristics of the display for the calibration process. A Target can be either predefined,
or custom defined.
Existing Targets can be selected in the main SpectraView II window from the Target listbox.
Selecting a Target will automatically configure the White Point, Tone Response Curves, Intensity and Black Level (if
applicable).
The choice of Target depends on the particular application and viewing conditions such as the ambient light level.

Modifying Targets

The parameters of Targets can be modified using the Edit Target button which will display the Edit Target dialog. Note
that modifying a Target will require the display monitor to be recalibrated to the new Target parameters.