5.4
Turn on the apparatus
CAUTION:
The operator and the patient must always wear PROTECTIVE GLASSES before starting treatment.
•
Plug the power cord on socket [12]
•
Connect the safety or interlock connector to socket [15]
•
Use switch [13] to turn the apparatus on.
•
The unit starts-up with the logo on the display. After a self test the code screen is displayed.
The following will appear on the screen:
•
Insert de secret code to unlock the unit by
pushing the selection buttons 1-4 in the right
order.
•
The current code is 1234
•
The unit will display the main menu
CAUTION:
•
Do not leave the device switched on unattended, always switch off at the end of use to avoid use
by unauthorized personnel.
•
It is strongly advised not to keep the machine switched on in a start state without the handpiece
being used, as it may overheat.
5.5
Main Menu
•
Select "Select Program" to start working via
protocols, see 6.8.3
•
Select "Create Program" to store personal
settings, see 6.8.4
•
Select "Settings" to enter the settings menu,
see 6.7
•
Select "Manual Operation" to set all parameters
manually, see 6.8.2.1
EN
8
1
2
3
4
Enter
Code
****
Select Program
Create Program
Settings
Manual Operation