Various Settings; Basic Operation; Manual Operation - Enraf Nonius Endolaser 422 Manual De Uso

5.6.3

Various settings

•
Select "Settings" with the push button [3]
( 6 - fig.1)
•
Choose Various function with the central
controller [11]
•
Press the confirmation button [7] to confirm
choice.
•
Press Return to return to the main menu
•
Select Buzzer to turn it on or off
•
Select Clear memory to clear the complete
memorised personal protocols
•
Select Probe 1 to set the default probe used
on channel 1
•
Select Probe 2 to set the default probe used
on channel 2
•
Select Energy for the output energy in Joule.
•
Select Fluency for the output energy in
Joule /cm 2 .
5.7

Basic Operation

5.7.1

Manual Operation

This allows you to rapidly use the therapy parameters.
Use the option "Manual Operation" to define your personal parameters settings for the Laserprobe.
To select the output channel push the button [1]
Every push on the button [1] will change the channel.
In the middle of the screen your selected channel will be shown as follows:
Channel < 1 >
for channel 1 and
The last program used for each output channel is indicated on the page.
Obviously, if a channel is currently being used it is not available for a new program until it has terminated.
Any of the parameters can only be changed before starting therapy however, modified programs cannot
be memorized.


✓


Channel < 2 >
for channel 2
Return
Settings
Display
Various
Language
Save
Cancel
Various
 Buzzer on
Clear Memory
Probe 1: LP025
Probe 2: CP400
 Energy
 Fluency
EN
11