Instruction Manual - GRAPHITE 58G950 Instrucciones De Uso

TRANSLATION OF THE ORIGINAL INSTRUCTION MANUAL
CAUTION: BEFORE USING THE PETROL CHAIN SAW READ THIS MANUAL CAREFULLY AND KEEP IT FOR
FUTURE REFERENCE.
SAFE USE OF PETROL CHAIN SAW
Warning!
Persons unfamiliar with instruction manual are not allowed to use chain saw.
Use the chain saw for cutting wood only.
Other use of the chain saw is the sole responsibility of the user who should bear in mind that it
may be dangerous.
The manufacturer is not responsible for losses and damages resulting from unintended use of the
chain saw.
WORKPLACE
a) Keep your workplace tidy and ensure it is well lit. Untidiness and insufficient illumination contribute to
accidents especially when chain saws are in use.
b) Keep children and bystanders away from the workplace. Distraction may cause loss of control over the
tool.
PERSONAL SAFETY
a) Use safety equipment, such as work suit, protective glasses, protective shoes, protective helmet,
earmuff protection and leather gloves. Using safety equipment in appropriate conditions reduces risk of
body injury.
b) Do not overestimate your abilities. Stand firmly and keep your balance at all times. It enables better
control over the saw in unpredicted situations.
c) Do not wear loose clothing or jewellery. Keep your hair, clothes and gloves away from moving
parts. Loose clothing, jewellery or long hair may be caught by moving parts.
TRANSPORTATION AND STORING
a) When carrying the chain saw switch off the engine, put on the chain cover and switch on the chain
brake. Carrying unsecured and operating chain saw may cause body injury.
b) Carrying the chain saw is possible only when holding its front handle. Other parts may not ensure
appropriate grip and even cause injury.
c) Inspect your chain saw. Check alignment and fixing of moving parts, check against part cracks
and all other factors that may affect operation of the saw. Repair the saw before use if it is found
damaged. Many accidents are caused by improper maintenance of tool.
d) Cutting chain should be clean and sharp. Proper maintenance of sharp cutting edges of chain reduces the
risk of jamming and makes operation easier.
POWER TOOL USE AND CARE
a) Check proper operation of the saw brake regularly. In emergency situation, non-operational brake may
make chain disengagement impossible.
b) When work with the chain saw is completed, the tool must be cleaned carefully as well as used
personal protective equipment, while the sensitive components must be maintained.
OPERATION
Switch off the chain saw engine before releasing the chain brake.
Be very careful at the end of a cut, because the saw having no support in processed material falls down
due to its inertia, which may cause injuries.
PETROL CHAIN SAW
58G950
DETAILED SAFETY REGULATIONS
21