Identification Data; Appliance Id Plate; Scaler Handpiece Identification Data - Mectron combi touch Manual De Uso Y Mantenimiento

combi touch
2

IDENTIFICATION DATA

A correct description of the model and of
the serial number of the appliance will allow
the After Sales Service to provide fast and
effective answers.
2.1 Appliance ID Plate
Each appliance is equipped with an
identification plate indicating the main
technical characteristics
number. The identification plate is located
under the appliance. The complete
technical specifications are provided in
Chapter 11 on page 103
NOTE: The complete list of symbols is
provided in Chapter 1.5 on page 8
Additional symbols and characteristics
of the device are provided on a separate
plate. This identification plate is located
under the appliance.
NOTE: The complete list of symbols and
their description is provided in
1.5 on page 8
2.2 Scaler Handpiece Identification Data
The handpiece name, MECTRON logo,
serial number, product code, HIBC matrix
code, and a series of symbols are laser
engraved on the scaler handpiece.
NOTE: The complete list of symbols is
provided in Chapter 1.5 on page 8
10
and serial
.
.
Chapter
.
Always provide this information every time
that you contact MECTRON After Sales Service.
combi touch
100-240 V ~ 90 VA - 50/60 Hz.
04000107
205000000
Bar Code HIBC 128
combi touch
Device for intermittent operation:
55 s ON - 30 s OFF with irrigation (ULTRASOUND/
POLISHING)
30 s ON - 120 s OFF without irrigation (ENDO, PERIO/
SCALER)
114000000
03120238
0476 0051
YYYY-MM
MANIPOLO ABLATORE
SLIM
manufacturer
Mectron S.p.A.
Via Loreto 15/A
16042 Carasco -GE- Italy
0051
YYYY-MM-DD
made in Italy
MANIPOLO ABLATORE
SLIM
114000000
03120000
MANIPOLO ABLATORE
SLIM
107000000
03120238
MANIPOLO ABLATORE
SLIM
114000000
Data Matrix
HIBC 128
03120238