Mectron combi touch Manual De Uso Y Mantenimiento página 182

combi touch
Press the pedal once and release it to
start the cycle.
The function and selected irrigation
type LEDs will flash. A sequence of short
acoustic signals indicates that the cycle is
running;
NOTE: The function can be interrupted
at any time by briefly pressing the pedal.
The keyboard will be reactivated and
configured in the last setting used.
The cycle lasts 23 seconds. Once ended,
the keyboard will be reactivated and
configured in the last setting used;
If the "flush" cycle is to be performed on
the water circuit, repeat the steps from
point 4 selecting irrigation with water.
At the end of the selected function time
or at the end of the "flush" cycle, the
system will be reactivated and configured
in the last setting used.
NOTE: If running a water circuit "flush"
cycle, remember to open the tap.
42
7
8
23 sec.
9
refill
refill
refill