Mectron combi touch Manual De Uso Y Mantenimiento página 206

combi touch
Repeat points 14 to 18 another 4 times.
The number of cycles run must guarantee
the complete drainage of the external
irrigation circuit. In any case, check that
liquids are no longer coming out of the
quick coupling on the cord of the scaler
handpiece;
CAUTION: Before connecting and
using the scaler handpiece, make sure
that the electrical contacts on both
the scaler handpiece and its cord are
perfectly dry.
Disconnect the syringe and repeat points
5 to 19 another 2 times;
Disconnect the syringe and fill it with
distilled water;
NOTE: Use of distilled water is
recommended for long periods of
non-use. If the device is used after the
disinfection procedure, use common
running water.
Reconnect the syringe to the end
of the hose from which it had been
disconnected.
66
19
20
21
22