Mectron combi touch Manual De Uso Y Mantenimiento página 210

combi touch
Lift the scaler handpiece connector;
CAUTION: Make sure the polisher
handpiece is stowed in its housing,
otherwise the system will remain
inactive.
Position the scaler handpiece connector
above a container or sink to catch the
liquid released during the disinfection
cycle;
CAUTION: Before connecting and
using the scaler handpiece, make sure
that the electrical contacts on both
the scaler handpiece and its cord are
perfectly dry.
Select "flush" on the touch keyboard (see
Chapter 6 on page 40)
The previously selected irrigation type
will remain active and the corresponding
LED will flash (faded out).
All the other selectable options on the
keyboard will be disabled.
NOTE: The "flush" mode can be
deactivated at any time by pressing the
"flush" key again. The keyboard will be
reactivated and configured in the last
setting used.
Select the tank irrigation circuit by
pressing the "irrigation" key and making
sure that the corresponding tank LED
lights up;
70
.
5
6
7
8
refill
refill