K9 Wrench - Mectron combi touch Manual De Uso Y Mantenimiento

8.4.1.6 K9 Wrench
Place the K9 wrench in a clean container.
Add enough enzymatic
solution to completely cover it.
Leave the K9 wrench to soak in the
enzymatic detergent
10 minutes at ambient temperature
(22 °C ±2 °C);
While soaking in the enzymatic solution,
gently brush all the surfaces until all
visible soil has been removed.
Use a clean brush with soft nylon bristles
for the external surfaces, and a clean pipe
cleaner with soft nylon bristles for the
internal cavities and grooves.
NOTE: Thoroughly brush all the
following parts of the K9 wrench for
about 20 seconds:
• Through-holes and internal
channels;
• Hard-to-clean areas such as
sharp edges and in particular, the
interstices between the cutting
cusps;
• External metal ring;
• Internal cavities, grooves and
fissures.
Remove the K9 wrench
enzymatic detergent solution.
Thoroughly rinse and brush all the
surfaces of the K9 wrench (see previous
point) under running water for at least 10
minutes;
CLEANING AND STERILISATION
37
detergent
solution for
38
39
from the
89