Cleaning And/Or Replacing The Water Filter - Mectron combi touch Manual De Uso Y Mantenimiento

combi touch
9.2 Cleaning and/or Replacing the Water Filter
Check and clean the water filter monthly, performing the following operations:
Disconnect the water supply hose from
the male coupling.
Unscrew the knurled bush of the male
coupling;
CAUTION: Before cleaning and/
or replacing the water filter, make sure
that the appliance is disconnected from
the mains electricity and that the liquids
container is not connected.
Extract the filter and wash it under
running water to eliminate any impurities
obstructing it;
Re-introduce the filter into its seat and
screw the knurled bush back into its
housing tightly until it is fully home.
NOTE: Replace the filter with a new
one if it is damaged or washing is not
effective.
100
1
2
3