Cleaning The Non-Sterilisable Parts; Required Materials; Cleaning Method - Mectron combi touch Manual De Uso Y Mantenimiento

combi touch
8.2 Cleaning the Non-Sterilisable Parts
The following procedure must be performed
on non-sterilisable parts of the appliance,
except for the tank and its cap. The parts in
question are:
• Machine core unit;
• Pedal and relative connection cable to
the machine;
8.2.1

Required Materials

• Clean, soft, low-lint cloths;
8.2.2

Cleaning Method

Clean the surface of the parts in question
using a clean, dry, low-lint cloth,
dampened with a detergent solution (pH
6-9);
Dry the parts using a dry, non-abrasive,
low-lint cloth.
CAUTION: Do not sterilise the non-
sterilisable parts. They may stop working and
cause damage to people and/or property.
WARNING: The device and its parts that
cannot be sterilised are not protected against
the penetration of liquids. Do not spray
liquids directly on the surface of the device or
its parts that cannot be sterilised.
74
• Quick coupling of polisher handpiece
and relative cord;
• Quick coupling of scaler handpiece and
relative cord.
WARNING: Always switch off the
appliance using the O/I switch and
disconnect it from the power mains before
carrying out cleaning tasks.
• Cleaning solution (pH 6-9).
1
2
CAUTION: Do not use running water to
clean the non-sterilisable parts.
CAUTION: Do not soak the non-
sterilisable parts in liquids and/or various
kinds of solutions.
CAUTION: DO NOT USE as disinfectants::
• Very alkaline products (pH > 9);
• Products containing sodium