Mectron combi touch Manual De Uso Y Mantenimiento página 160

combi touch
Correctly insert the scaler handpiece
onto its cord by matching the alignment
notch on the handpiece connector with
the alignment key on the cord connector.
Check that the electrical contacts of both
are perfectly dry and if necessary dry
them by blowing with compressed air;
Position the handpiece on its dedicated
support.
CAUTION: Use the support only
to install the Mectron 500 ml tank and
to stow the handpiece. Do not use the
support for other purposes.
CAUTION: Before extracting the
powder container or unscrewing
the caps, check that the appliance is
switched off and disconnected from
the power mains, or that the "refill"
function has been carried out and the
corresponding LED stays lit (see
5.2.2 on page 28 ).
Unscrew the cap of the PROPHY white
powder container on the left.
CAUTION: The PROPHY powder
container is white coloured and is
positioned on the left.
20
8
9
10
Chapter