Siemens SINAMICS DCM Manual página 735

Signal destinations for STW2_BM for telegram 220
Signal Meaning
STW2.0 Command data set selection CDS bit 0
STW2.1 Reserved; bit must always be set to 0
STW2.2 Command data set selection DDS bit 0
STW2.3 Command data set selection DDS bit 1
STW2.4 Reserved; bit must always be set to 0
STW2.5 1 = Bridge ramp-function generator
STW2.6 Reserved
STW2.7 1 = Speed controller integration value set
STW2.8 1 = Enable droop
STW2.9 1 = Enable speed controller
STW2.10 Reserved
0 = Speed-controlled operation
STW2.11
1 = Torque-controlled operation
STW2.12 Reserved
STW2.13 Reserved
STW2.14 Reserved
STW2.15 Controller sign-of-life toggle bit
<1> Interconnection is not inhibited.
1 2
DO: DC_CTRL
PROFIdrive - STW2_BM control word sector metal interconnection
p0820[0] = r2093.2
<1>
p0821[0] = r2093.3
<1>
p50641[0] = r2093.5
p50695[0] = r2093.7
p50684[0] = r2093.8
p0856[0] = r2093.9
<1>
<1>
p50687[0] = r2093.11
<1>
<1>
<1>
p2081[15] = r2093.15
3 4
Interconnection
Function diagram Inverted
parameter
p0810 = r2093.0 [8560.3] –
– – –
[8565.3] –
<1>
[8565.3] –
<1>
– – –
[3152.1] –
– – –
[6815.1] –
[6805.4] –
[2580.3] –
<1>
– – –
<1>
[6830.2] –
– <1> – –
– <1> – –
– – –
<1>
[2472.1] –
5 6
fp_2426_13_eng.vsd
28.08.18 V01.05.00
PROFIdrive sampling time
7 8
Function diagram
- 2426 -
SINAMICS DCM