DENTAL LED OPERATING LIGHT POLARIS
INDEX
DECLARATION OF CONFORMITY.......................
SYMBOLS USED IN THE MANUAL AND IN THE
PRODUCT................................................................
SAFETY WARNINGS..............................................
INTRODUCTION.....................................................
TECHNICAL DESCRIPTION..................................
ELECTRICAL WIRING............................................
INSTALLATION........................................................
USE..........................................................................
MAINTENANCE......................................................
USE AND STORAGE CONDITIONS.....................
REPAIRS..................................................................
WARRANTY.............................................................
WARNING RAEE.....................................................
SYMBOLS USED IN THE MANUAL AND IN THE PRODUCT
Type B applied part
Alternating current
!
Attention, look at instruction manual
Ground
Prohibition
(this icon identifies what to prevent doing not to cause
damage to the device)
!
Warning
(this simbol warns to be very careful in order to
avoid any situation that could cause damage to the device)
Switch Open
(partial)
Switch Closed
(partial)
Auxiliary power supply connector
Light intensity adjustment
Color temperature adjustment
Warning label – Hazard symbol
LED RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LED PRODUCT
Explanatory label
Emission wavelenghts:
400-700 nm
Maximum emitted power: 10 mW
LED RAYONNEMENT
NE PAS REGARDER DANS LA TRAJECTOIRE DU LED
CLASS 2 LED PRODUIT
Longeurs d'onde des émission:
400-700 nm
Maximum puissance émise:
10 mW
CEI EN 60825-1:2003
RAEE symbol
USER'S GUIDE
12
SAFETY WARNINGS
11
Before using the operating light system, please
read the instructions contained in this manual
12
and please pay attention to the following indica-
12
tions:
12
- dental operating light has to be used to illuminate
14
patient oral cavity and must be utilized only for this
14
purpose by medical staff;
15
- device installation must be realized only by autho-
16
rized staff;
17
- dental operating light must be installed on appropri-
17
ate medical devices such as dental treatment unit,
17
or supplied in conformity to electric supply specifica-
18
tions exposed in this manual and with wiring in con-
18
formity to laws applied for medical local;
- the light system must be supplied with a net isola-
tion transformer;
- do not stare into beam;
- do not realize maintenance or light cleaning during
light switched on;
- do not introduce any object in the ventilation holes
that could realize a contact with in voltage point;
- clean light surface according to the indications con-
tained in this manual;
- do not cover the ventilation light holes; clean and
control periodically holes to assure a correct ventila-
tion;
- do not leave unguarded the light switched on for
long period;
- spray or liquid vapour entry in the light envelope
has to be avoid.
INTRODUCTION
Thank you for purchasing the dental operating
light "POLARIS".
"POLARIS" has been designed on 3 main basis:
aesthetics, functionality and simplicity, putting par-
ticular attention to research in design and materials.
The result is a modern operating light, with a soft,
fresh, pleasant design, but also very stable and
functional. "POLARIS" will give you high level perfor-
mances and will surely meet with any of your profes-
sional requirements. POLARIS assures an elevate
light intensity, 3D light pattern (in order to emphasize
the lowest details), a faithful colours' reproduction of
treatment area, the possibility to regulate colour tem-
perature, the absence of shadows and the emission
of cold light.
ENGLISH